Burlesque Brain: Difference between revisions

From Anatomy Teaching Models
(Created page with "A large model used to demonstrate the skull and meninges protecting the brain. Useful in big lecture theatres for first year anatomy teaching and for public demonstrations. Th...")
 
No edit summary
Line 10: Line 10:
Burlesque Brain02.jpg|
Burlesque Brain02.jpg|
</gallery>
</gallery>
== Production Information ==
== Production Information ==
This model was made as a one-off from the inside out. The very simple brain shape was carved from a large block of expanding foam, covered with a resin shell, painted and sealed.
This model was made as a one-off from the inside out. The very simple brain shape was carved from a large block of expanding foam, covered with a resin shell, painted and sealed.
<gallery mode="nolines" widths=200px heights=200px>
Burlesque Brain16.jpg|
</gallery>
The pattern pieces for the fabric layers were made by wrapping the brain model with paper and then cutting that paper along lines that resembled sulci until the pattern lay flat. The following images are of tidy reproductions of the original patterns. The Pia pattern was made first and the arachnoid/dura pattern graded up from that. Background grid is 100mm x 100mm.
<gallery mode="nolines" widths=200px heights=200px>
Burlesque Brain03.jpg|
Burlesque Brain04.jpg|
</gallery>


'''Creators:''' Dr Christine Jasoni (initial idea and academic support), Fieke Neuman (sculpting, painting, patterns and sewing), Shane Soal (expanding foam, resin, painting), Howard Haugh (design and construction of the aluminium components), Alex Witherow (wooden base of carry case). All from [http://www.otago.ac.nz/anatomy Department of Anatomy], [http://www.otago.ac.nz University of Otago] except for Mr Haugh.
'''Creators:''' Dr Christine Jasoni (initial idea and academic support), Fieke Neuman (sculpting, painting, patterns and sewing), Shane Soal (expanding foam, resin, painting), Howard Haugh (design and construction of the aluminium components), Alex Witherow (wooden base of carry case). All from [http://www.otago.ac.nz/anatomy Department of Anatomy], [http://www.otago.ac.nz University of Otago] except for Mr Haugh.

Revision as of 04:16, 10 August 2016

A large model used to demonstrate the skull and meninges protecting the brain. Useful in big lecture theatres for first year anatomy teaching and for public demonstrations. The materials used are tactile and each is a metaphor for the function of a particular layer

  • Skull - several hard plates that interlock
  • Dura mater - tough and flexible
  • Arachnoid mater - complex web-work with large blood vessels
  • Pia mater - delicate and fitting close to the brain

Click to enlarge images of Dr Jasoni demonstrating the Burlesque Brain:

Production Information

This model was made as a one-off from the inside out. The very simple brain shape was carved from a large block of expanding foam, covered with a resin shell, painted and sealed.

The pattern pieces for the fabric layers were made by wrapping the brain model with paper and then cutting that paper along lines that resembled sulci until the pattern lay flat. The following images are of tidy reproductions of the original patterns. The Pia pattern was made first and the arachnoid/dura pattern graded up from that. Background grid is 100mm x 100mm.


Creators: Dr Christine Jasoni (initial idea and academic support), Fieke Neuman (sculpting, painting, patterns and sewing), Shane Soal (expanding foam, resin, painting), Howard Haugh (design and construction of the aluminium components), Alex Witherow (wooden base of carry case). All from Department of Anatomy, University of Otago except for Mr Haugh.

Keywords: Teaching, Anatomy, Neuroanatomy, Meninges, Skull, Dura, Arachnoid, Pia, Brain, Science, Biology



CC.png

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License